160 × 32 mai hoto LCD mai rahusa 4.3 inch monochrome LCD nuni module
Gabatarwar Samfur
| Lambar Samfura | Saukewa: RXMG-16032B |
| Girman Nuni | 99 x 24mm (VA) |
| Nau'in | STN |
| Aiki na yanzu | 220μA (5.0V) |
| Wutar lantarki mai aiki | 4.8 ~ 5.2V |
| Mai sarrafawa | T6963C |
| Hasken baya | Yellow-Green |
| Yanayin nuni | Yellow-Green(STN) |
| Interface | Daidaici |
| Girman digo | 0.48X0.48(WXH) mm |
| Yanayin Aiki | 0 ~ 50 ℃ |
| zafin jiki na ajiya | -20 ~ 70 ℃ |
| Aikace-aikace | Nunin kayan aiki, kayan aiki da sauransu |
TSARIN PIN:
| PIN | ALAMA | BAYANIN SAMARI | PIN | ALAMA | BAYANIN SAMARI |
| 1 | A0 | Yi rijista zaɓi-LOW=Umarori, HIGH=Data | 8 zu15 | DB0 zuwa DB7 | Data BUS-Software zaɓaɓɓen yanayin 4 ko 8 bit |
| 2 | /CS2 | Zaɓi guntu don IC2 | 16 | RST | Sake saita tsarin (H/L) |
| 3 | /CS1 | Zaɓi guntu don IC1 | 17 | VEE | Direban Wutar Lantarki LCD |
| 4 | /RD | Karanta (L) | 18 | NC | Babu |
| 5 | /WR | Rubuta (L) | 19 | BLA | Anode na LED |
| 6 | VDD | Wutar lantarki (+5V) | 20 | BLK | Cathode na LED |
| 7 | VSS | GND |
Ayyukanmu
KADDARA:
| Nunawa | kashi, graphic, hali monochrome LCD module&TFT an karɓi |
| Yanayin nuni | TN STN |
| Nau'in nuni | COB, COG, TAB |
| Girman Lcd (cm) | 0.11,0.14 |
| kauri haske baya (cm) | 2.8,3.0,3.3 |
| Interface | Daidaici (8bit, 4bit, 16 bit, 80 yanayin, 68 yanayin), serial (i2c, spi, uart, usb) |
| Mai sarrafawa | Na zaɓi |
| IC | Mutu ko kunnshi na zaɓi |
| Hardware ko software | Duk sun yarda |
| Bayanin da aka bayar | Duk mai fa'ida, samfuri, hoto, zane, jagorar amfani da sauransu suna da kyau |
1, ina soda LCD module nuni 8 lambobi da shaci size ne 35mm*70mm…………?
Amsa: Babu matsala. Da farko, pls aiko mana da takarda zane ko samfurori; za mu gabatar da wanda ya dace idan ya kasance daidaitattun samfurori. Ko kuma za mu iya gyara bisa daya daga ciki.
2, Wannan LCD module ne kawai abin da muke so, amma shi ne babban size, kana da wani karami size?Ada abun ciki na nuni yana buƙatar canjawa kaɗan.
Amsa: Don nau'in nau'in LCD module, idan kuna buƙatar gyara girman fa'ida ko abun ciki na nuni, ana buƙatar sabon gilashin LCD. Za mu sanar da ku na mold
caji bayan tabbatarwa lokacin biya,za mu fara takarda zane don duba ku.
3, Wannan LCD module backlight ne rawaya-kore,amma Iso blue backlight.
Amsa: babu matsala, za mu iya canza maka.
4, Ina so siffanta wani sabon LCD module.Ciya ka?
Amsa: E, za mu iya. Da fatan za a aika da takarda zane. Idan ba haka ba, don Allah gaya mani girman fa'idar nunin LCD, bayanin nuni, idan kuna buƙatar hasken baya ko PCB
jirgi tare da IC, Za mu kimanta farashinkuma a ba ku farashi da wuri.
5, Abin da ke jagorantar lokaci don kayan aiki
Amsa: 15 zuwa 30 days bayan zana takarda comfirmation da tooling cajin biya, za mu iya gaya maka daidai lokacin da ka tabbatar th zane takarda.
6,Za a iya aiko mana da samfurori don dubawa?
Amsa: E,. Akwai odar samfurori
7,MeneneLokacin Jagora?
Amsa: Idan muna da hannun jari don daidaitattun, babban lokacin shine kwana ɗaya bayan biya. Idan shine yawan samarwa na musamman, babban lokacin shine game da kwanaki 1530.
Idan za mu iya gamawa a baya, za mu aikaku bayanai a gaba
8 , Wadanne hanyoyin biyan kudi za ku iya karba?
Amsa: A halin yanzu muna karɓar T/T kawai.